Level; Customer Value; Activate Table - Endress+Hauser Levelflex FMP53 Operating Instructions Manual

Levelflex FMP53 PROFIBUS PA
Level (Semiautomatic)
Navigation
Prerequisite
Description

Customer value

Navigation
Prerequisite
Description
User entry

Activate table

Navigation
Prerequisite
Description
Selection
Additional information
Endress+Hauser
 Setup → Advanced setup → Linearization → Level
• Linearization type (→  121) = Table
• Table mode (→  125) = Semiautomatic
Displays measured level (value before linearization). This value is transmitted to the table.
 Setup → Advanced setup → Linearization → Customer value
Linearization type (→  121) = Table
Enter linearized value for the table point.
Signed floating-point number
 Setup → Advanced setup → Linearization → Activate table
Linearization type (→  121) = Table
Activate (enable) or deactivate (disable) the linearization table.
• Disable
• Enable
Meaning of the options
• Disable
The measured level is not linearized.
If Linearization type (→  121) = Table at the same time, the device issues error
message F435.
• Enable
The measured level is linearized according to the table.
When editing the table, the Activate table parameter is automatically reset to
Disable and must be reset to Enable after the table has been entered.
Operating menu


127