Selecting The Paper Size - Epson Stylus Pro 7700 User Manual

Epson Stylus Pro 7700/7710/9700/9710

Selecting the paper size

Paper Size *XXXX is the paper size.
Roll XXXX Roll Paper - Banner
paper
XXXX Roll Paper - Borderless (Auto Expand)
XXXX Roll Paper - Borderless (Retain Size)
XXXX Roll Paper - Borderless Banner
XXXX Roll Paper
User's Guide
Basic Settings
Explanation
Select this size when using a banner printing application.
This prints no margins on the top and bottom and a 3-mm
margin on the right and left sides.
Select this size when performing borderless printing on
the roll paper. In the borderless printing for Auto Expand,
the printer driver enlarges the size of print data 3 mm on
both the right and left sides. You can change the amount
of enlargement in the Expansion setting. The size of print
data also enlarges on the top and bottom sides at an equal
rate. This enlarges the size of print data automatically so
that you can perform borderless printing easily. Enlarged
areas that exceed the paper size will not be printed on the
paper.
Select this size when performing borderless printing on
roll paper. The printer driver prints without changing the
ratio of the print data. It does not enlarge the image data.
You need to enlarge 3 mm on both the left and right sides
of the data by using the application that created it in
advance.
Select this size when performing borderless printing by
using an application that supports banner printing. The
printer driver enlarges the print area 3 mm on both the left
and right for the width of the paper. Since it does not
enlarge the print data, the sizes on the top and bottom are
printed at the size you created. However, you need to
create the data exceeding 3 mm on both the right and left
sides in advance. This setting has no margin on the top
and bottom sides.
Select this size when printing with border on the roll
paper. This prints with the margin set in the ROLL PAPER
MARGIN menu of the PRINTER SETUP menu in the Menu
mode.
See "PRINTER SETUP" on page 20
54