Epson Stylus Pro 7700 User Manual page 42

Epson Stylus Pro 7700/7710/9700/9710
C
Move the paper guides to the vertical position,
and then bring the front basket back as far as it
goes.
D
Bring the front paper basket up and fasten it
with the hook-and-loop fastener straps.
Note:
If you are concerned about the print quality
when printing on Doubleweight Matte Paper
or Enhanced Matte Paper, try to set the paper
guides in the front direction.
User's Guide
Paper Handling
E
For Epson Stylus Pro 9700/9710, switch the
position of the rear paper basket depending on
the paper size.
If the paper is A1 or smaller:
Lift both the front and rear baskets as shown
below.
If the paper is larger than A1 size:
Tilt the rear basket until parallel to the floor
during printing.
42