Replacing The Cutter - Epson Stylus Pro 7700 User Manual

Epson Stylus Pro 7700/7710/9700/9710

Replacing the Cutter

When the paper cutter does not cut cleanly, it may be
dull and require replacement. See the following
section for the product code of the paper cutter that is
supported with this printer.
See "Options and Consumable Products" on page
60
Caution:
c
Take care not to damage the cutter blade.
Dropping it or knocking it against hard objects
may chip the blade.
A
Make sure the printer is on.
If paper is loaded, remove it from the printer.
B
Press the button to enter the Menu mode.
C
Press the / button to select
MAINTENANCE, and then press the
D
Press the / button to select CUTTER
REPLACEMENT, and then press the
User's Guide
Maintenance
E
Press the
The paper cutter holder stops at the
replacement position.
F
To remove the cover, lower it with the knob,
and pull it low.
button.
G
Screw down the cutter with a screwdriver.
button.
H
Carefully remove the old cutter from the printer.
w
70
button.
Warning:
Take care not to hurt yourself with the
blade of the cutter. Do not let children
touch the blade.