Selecting The Paper Size - Epson EPL-N1200 Reference Manual

6. Send a print job from your application. The control panel
display shows Manual Feed and the selected page size.
7. Press On Line to print. A sheet of paper is loaded and printed.
8. Insert another sheet and press On Line again to print the next
page of print data, if necessary. Repeat this step for every
page to be printed.

Selecting the paper size

By default, the printer driver is set up for A4 size paper to be
loaded in the Multi Purpose Tray. If you load paper of a
different size, you may need to change the paper size setting
using one of the following methods.
Using the printer driver:
Choose the paper size in the Print Settings tab, or the Paper tab.
For more information on using the printer driver, see Chapter 3.
Using the Remote Control Panel utility:
Bring up the Remote Control Panel by typing EPRCPO at the
DOS prompt. Select the appropriate emulation from the main
Remote Control Panel window and click the Page Setup
button. Then choose the paper size.
Using the SelecType mode:
For information on changing the paper size in SelecType mode,
see Chapter 6.
Note:
If you want to use a custom-size paper from 92 148.5 mm (3.6 6
inches) to 216 356 mm (8.5 14 inches), use the MP Tray and make
the size setting according to one of the following methods.
1-6
Paper Handling