Epson Stylus Pro 7700 User Manual page 83

Epson Stylus Pro 7700/7710/9700/9710
C
Open the front cover and use a soft, clean cloth
to carefully clean away any dust or dirt inside
the printer.
Wipe the gray part by following the directions
of the arrows. If there is a serious problem of
dirt on the inside of the printer, clean it using a
soft, clean cloth dampened with a mild
detergent. Then, wipe the inside of the printer
with a dry, soft cloth.
Caution:
c
❏ Do not touch the light magenta parts (roller
and ink absorption) in the illustration
above; otherwise, prints may be soiled.
❏ Do not touch the ink tubes located inside
the printer.
D
If the back of a print is soiled, wipe the gray
part carefully.
User's Guide
Maintenance
E
If some powdery paper dust is accumulated on
the platen, use something like a toothpick to
remove it.
83