Replacing Ink Cartridges; When Ink Needs To Be Replaced/When Ink Gets Low; Confirming The Ink Cartridge Remaining - Epson Stylus Pro 7700 User Manual

Epson Stylus Pro 7700/7710/9700/9710

Replacing Ink Cartridges

Note:
When you replace the ink cartridges while the printer
is turned off, the remaining ink cannot be detected
correctly so the ink may become unusable before the
Ink Check light comes on and you cannot print
correctly. Follow the steps below to replace an ink
cartridge.
When ink needs to be replaced/
When ink gets low
When the Ink Check light is flashing, this indicates
that the ink level is low. If EPSON Status Monitor is
installed, a message appears on the computer's display
that tells you the ink is low. If the ink is low, you need
to replace the ink cartridge as soon as possible. You
cannot continue to print even if only one of the ink
cartridges is expended. If an ink cartridge runs out
while printing, replace it with a new one so the printer
can continue to print.
Windows
User's Guide
Maintenance
Mac OS X
Click How to to see the instructions on replacing an
ink cartridge.
Confirming the ink cartridge
remaining
Using the printer's control panel
The remaining ink in the cartridges is always
displayed on the LCD panel.
See "Display" on page 13
You can check the accurate amount of ink remaining
in the PRINTER STATUS menu. You need to check the
amount of ink remaining before printing a lot of data.
If there is a low ink cartridge, prepare a new one.
See "Using the Menu mode" on page 15
See "PRINTER STATUS " on page 23
64