Epson Stylus Pro 7700 User Manual page 74

Epson Stylus Pro 7700/7710/9700/9710
E
Check if there are missing dots on the nozzle
check pattern.
If there are no missing dots, click Finish.
If there are missing dots, click Clean.
After printing a nozzle check pattern, make
sure that the nozzle check pattern printing is
complete before starting to print your data or
cleaning the print head.
Checking the print head nozzles
using the printer's control panel
A
Make sure that roll paper or A4/Letter size or
larger is loaded in the printer.
Select the correct paper source according to the
paper.
See "Paper Handling" on page 28
B
Press the button to enter the Menu mode.
C
Press the / button to display TEST
PRINT, and then press the
User's Guide
Maintenance
D
E
F
button.
74
Press the / button to display NOZZLE
CHECK, and then press the
Press the button to start printing a nozzle
check pattern.
Check the nozzle check pattern.
Good
There are no missing dots so the nozzles are
not clogged.
Bad
There are missing dots so the nozzles are
clogged. Perform head cleaning.
See "Head cleaning" on page 75
button.