Epson Stylus Pro 7700 User Manual page 92

Epson Stylus Pro 7700/7710/9700/9710
Error messages
INK CARTRIDGE
PLEASE USE GENUINE EPSON INK
CARTRIDGES
INK CARTRIDGE
NON-GENUINE CARTRIDGE!
QUALITY OF NON-GENUINE
INK MAY VARY
NON-GENUINE CARTRIDGE
MAY NOT PERFORM AT
OPTIMUM. CONTINUE?
DECLINE
ACCEPT
INK CARTRIDGE ERROR
PLEASE INSTALL THE CORRECT
CARTRIDGE
NOZZLE CLOG DETECTED
NOT ENOUGH INK
CONTINUE CLEANING?
YES (RECOMMENDED)
NO
NOZZLE CLOG DETECTED
NOT ENOUGH EMPTY SPACE
IN MAINT TANK
CONTINUE CLEANING?
YES (RECOMMENDED)
NO
Error messages related to the options
Error messages
TAKE-UP DISCONNECTED
SET AUTO TAKE-UP REEL SYSTEM
IN PRINTER AND RESTART THE
PRINTER
TAKE-UP DISCONNECTED
AUTO TAKE-UP REEL UNIT IS
DISCONNECTED
DO YOU CONTINUE?
NO
YES
TAKE-UP ERROR
CHECK THE STATUS OF AUTO
TAKE-UP REEL UNIT AND RESTART
THE PRINTER
User's Guide
Problem Solver
Description
Non-genuine ink cartridge
is installed.
Non-genuine ink cartridge
is installed.
An ink cartridge that
cannot be used with this
printer is installed.
There is not enough ink to
perform cleaning.
There is not enough space
in the maintenance tank
to perform cleaning.
Description
Auto Take-up Reel Unit is
not correctly installed in the
printer.
Auto Take-up Reel Unit is
not correctly installed in the
printer.
The roll paper is not set to
the Auto Take-up Reel Unit
properly.
92
What to do
Replace the ink cartridge with a genuine Epson ink
cartridge.
See "About ink cartridges" on page 66
See "Replacing ink cartridges" on page 67
Select DECLINE to replace the ink cartridge with a
genuine Epson ink cartridge. Selecting ACCEPT may void
EPSON's warranty.
See "About ink cartridges" on page 66
See "Replacing ink cartridges" on page 67
Remove the ink cartridge, and install an ink cartridge
that can be used with this printer.
See "About ink cartridges" on page 66
See "Replacing ink cartridges" on page 67
By clicking YES, the message to replace the ink cartridge
appears. Replace the ink cartridge with a new one to
continue cleaning.
See "Replacing Ink Cartridges" on page 64
By clicking YES, the message to replace the maintenance
tank appears. Replace the maintenance tank with a new
one to continue cleaning.
See "Replacing the Maintenance Tank" on page 68
What to do
Turn the printer off, and then install the Auto Take-up
Reel Unit properly.
See "Using Auto Take-up Reel Unit (For Epson
Stylus Pro 9700/9710 only)" on page 44
Select NO, and turn the printer off, and then install the
Auto Take-up Reel Unit properly. If you select YES, the
paper is ejected without using the Auto Take-up Reel
Unit.
See "Using Auto Take-up Reel Unit (For Epson
Stylus Pro 9700/9710 only)" on page 44
Press the button to release the paper presser,
and then set the roll paper to the Auto Take-up Reel
Unit properly.
See "Using Auto Take-up Reel Unit (For Epson
Stylus Pro 9700/9710 only)" on page 44