Epson Stylus Pro 7700 User Manual page 49

Epson Stylus Pro 7700/7710/9700/9710
C
Remove the flange by pinching the knob.
D
Reverse the flange so that the smaller knob is
positioned on the outside, then replace it on the
movable unit by pinching the knob.
User's Guide
Paper Handling
Installing a take-up reel core
The method of installing the take-up reel unit is the
same for both 2-inch and 3-inch reel cores.
A
Make sure that the lock lever is released (turned
to the left). Slide the movable unit to the left
end of the horizontal strut.
B
Slip one end of the take-up reel core over the
flanged knob on the drive unit.
C
Insert the flanged knob on the movable unit
into the other end of the take-up reel core.
49