Selecting The Paper Size - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910

Selecting the paper size

Paper Size *XXXX is the paper size.
Roll XXXX Roll Paper - Banner
paper
XXXX Roll Paper - Borderless (Auto Expand)
XXXX Roll Paper - Borderless (Retain Size)
XXXX Roll Paper - Borderless Banner
Cut sheet XXXX Sheet - Borderless (Auto Expand)
XXXX Sheet - Borderless (Retain Size)
User's Guide
Explanation
Select this size when using a banner printing application.
This prints no margins on the top and bottom and a 3-mm
margin on the right and left sides.
Select this size when performing borderless printing on the
roll paper. In the borderless printing for Auto Expand, the
printer driver enlarges the size of print data 3 mm on both
the right and left sides. You can change the amount of
enlargement in the Expansion setting. The size of print data
also enlarges on the top and bottom sides at an equal rate.
This enlarges the size of print data automatically so that you
can perform borderless printing easily. Enlarged areas that
exceed the paper size will not be printed on the paper.
Select this size when performing borderless printing on roll
paper. The printer driver prints without changing the ratio
of the print data. It does not enlarge the image data. You
need to enlarge 3 mm on both the left and right sides of the
data by using the application that created it in advance.
Select this size when performing borderless printing by
using an application that supports banner printing. The
printer driver enlarges the print area 3 mm on both the left
and right for the width of the paper. Since it does not
enlarge the print data, the sizes on the top and bottom are
printed at the size you created. However, you need to
create the data exceeding 3 mm on both the right and left
sides in advance. This setting has no margin on the top and
bottom sides.
Select this size when performing borderless printing on
both the right and left sides of a single cut sheet. In the
borderless printing for Auto Expand, the printer driver
enlarges the size of print data 3 mm on both the right and
left sides. You can change the amount of enlargement in
the Expansion setting. The size of print data is also enlarged
on the top and bottom sides at an equal rate. This enlarges
the size of print data automatically so that you can perform
borderless printing easily. Enlarged areas that exceed the
paper size on both the right and left sides will not be
printed on the paper. In addition, a 3-mm margin on the top
and a 14-mm margin on the bottom appear.
Select this size when performing borderless printing on
both the right and left sides of a single cut sheet. In Retain
Size, the driver performs borderless printing without
enlarge the print data. You need to create the data
exceeding 3 mm on both the right and left sides in advance.
While the margin sizes on the top and bottom are printed at
the size you created, a 3-mm margin on the top and a
14-mm margin on the bottom appear.
Basic Settings 57