Head Alignment; Network Setup - Epson Stylus Pro 7700 User Manual

Epson Stylus Pro 7700/7710/9700/9710

HEAD ALIGNMENT

You can perform print head alignment. For more details, see the following section.
"Print head alignment" on page 79
Item
PAPER THICKNESS
ALIGNMENT

NETWORK SETUP

When you use the printer on the network, set the following items.
* Default settings
Item
NETWORK SETUP
IP ADDRESS SETTING
IP,SM,DG SETTING
BONJOUR
INIT NETWORK SETTING
OPTIONS SETUP
When you use the optional equipment, set the following items.
Item
TAKE UP REEL
User's Guide
The Control Panel
Parameter
SELECT PAPER TYPE
SELECT THICKNESS
AUTO
MANUAL
Parameter
DISABLE *
ENABLE
AUTO *
PANEL
Ask your system administrator for detailed information.
ON *
OFF
EXECUTE
Parameter
TAKE UP REEL VERSION
Explanation
When using Epson special media, select the paper type. If you
use non-Epson special media, enter the paper thickness in the
range of 0.1 to 1.5 mm.
When you select AUTO, the adjustment pattern for output is read
by the sensor and the optimum adjustment value is registered
automatically in the printer. When you select MANUAL, you need
to check the pattern and enter the value for alignment.
Explanation
You can make the network settings using the printer's control
panel. The following items appear only when ENABLE is
selected. After setting the items, press the
NETWORK SETUP menu, so the network is reset and the network
connection is available after 40 seconds. The NETWORK SETUP
menu does not appear while resetting the network.
You can select the method to set the IP address to the printer.
When you select PANEL, IP,SM,DG SETTING appears.
You can enable or disable the Bonjour setting.
You can return the network settings of the printer to the factory
default value.
Explanation
Displays the version of Auto Take-up Reel Unit.
26
button in the