Selecting The Paper Size - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910

Selecting the paper size

Paper Size *XXXX is the paper size.
Roll XXXX Roll Paper - Banner
paper
XXXX Roll Paper - Borderless (Auto
Expand)
XXXX Roll Paper - Borderless (Retain Size)
XXXX Roll Paper - Borderless Banner
Cut XXXX Sheet - Borderless (Auto Expand)
sheet
XXXX Sheet - Borderless (Retain Size)
User's Guide
Basic Settings
Explanation
Select this size when using a banner printing
application. This prints no margins on the top and
bottom and a 3-mm margin on the right and left
sides.
Select this size when performing borderless printing
on the roll paper. In the borderless printing for Auto
Expand, the printer driver enlarges the size of print
data 3 mm on both the right and left sides. You can
change the amount of enlargement in the
Expansion setting. The size of print data also
enlarges on the top and bottom sides at an equal
rate. This enlarges the size of print data
automatically so that you can perform borderless
printing easily. Enlarged areas that exceed the
paper size will not be printed on the paper.
Select this size when performing borderless printing
on roll paper. The printer driver prints without
changing the ratio of the print data. It does not
enlarge the image data. You need to enlarge
3 mm on both the left and right sides of the data by
using the application that created it in advance.
Select this size when performing borderless printing
by using an application that supports banner
printing. The printer driver enlarges the print area
3 mm on both the left and right for the width of the
paper. Since it does not enlarge the print data, the
sizes on the top and bottom are printed at the size
you created. However, you need to create the
data exceeding 3 mm on both the right and left
sides in advance. This setting has no margin on the
top and bottom sides.
Select this size when performing borderless printing
on both the right and left sides of a single cut sheet.
In the borderless printing for Auto Expand, the
printer driver enlarges the size of print data 3 mm
on both the right and left sides. You can change
the amount of enlargement in the Expansion
setting. The size of print data is also enlarged on the
top and bottom sides at an equal rate. This
enlarges the size of print data automatically so that
you can perform borderless printing easily.
Enlarged areas that exceed the paper size on both
the right and left sides will not be printed on the
paper. In addition, a 3-mm margin on the top and
a 14-mm margin on the bottom appear.
Select this size when performing borderless printing
on both the right and left sides of a single cut sheet.
In Retain Size, the driver performs borderless
printing without enlarge the print data. You need
to create the data exceeding 3 mm on both the
right and left sides in advance. While the margin
sizes on the top and bottom are printed at the size
you created, a 3-mm margin on the top and a
14-mm margin on the bottom appear.
56