Epson Stylus Pro 7700 User Manual page 88

Epson Stylus Pro 7700/7710/9700/9710
Error messages
PAPER ERROR
LOAD PAPER CORRECTLY
REFER TO THE MANUAL
PAPER SENSOR ERROR
PRESS THE BUTTON
LOAD DIFFERENT PAPER
PAPER LOW
BORDERLESS ERROR
LOAD A SUPPORTED PAPER SIZE
OR LOAD PAPER CORRECTLY
PAPER EJECT ERROR
REMOVE PAPER FROM PRINTER
PAPER SIZE ERROR
LOAD CORRECT PAPER SIZE
PAPER JAM
REMOVE PAPER
User's Guide
Problem Solver
Description
The paper is not loaded
correctly.
The barcode has not been
read correctly.
The roll paper is close to
running out.
The paper installed is not
supported for borderless
printing.
The size of the cut sheet
media is not recognized
properly.
The paper is not set
correctly.
The roll paper is used with
the Sheet mode.
The loaded paper size
does not match the data
size.
The paper is jammed.
88
What to do
Press the button to release the paper presser, and
remove the paper. Then, set the paper correctly.
See "Using Roll Paper" on page 29
See "Using Cut Sheet Media" on page 36
Press the button to clear the error, or press the
button to release the paper presser to set a
different paper.
See "Using Roll Paper" on page 29
See "Using Cut Sheet Media" on page 36
Replace the roll paper with a new one.
See "Using Roll Paper" on page 29
Press the button to cancel jobs, and then eject
the paper. Then load a different size of paper.
See "Using Roll Paper" on page 29
See "Using Cut Sheet Media" on page 36
See "Paper Information" on page 166
If the paper is wavy or slack, the printer cannot
recognize the paper size correctly. In this case, flatten
the paper before loading it in the printer.
See "Using Cut Sheet Media" on page 36
Set the paper correctly in the printer.
See "Using Roll Paper" on page 29
See "Using Cut Sheet Media" on page 36
Press the button to release the paper presser, and
then remove the paper.
Match the loaded paper size to the data size.
Remove the jammed paper.
See "Feeding or ejecting troubles" on page 102