Loading Cut Sheet A3 Size Or Larger / Thick Paper - Epson Stylus Pro 7700 User Manual

Epson Stylus Pro 7700/7710/9700/9710
D
Load the sheet into the paper insertion slot
until it meets resistance.
Align the right edge of the paper with the
setting position, and then insert the paper until
it meets resistance. When using paper sizes A4
or below, set the paper until it reaches the
bottom along the line on the metal part under
the paper insertion slot.
PRESS THE BUTTON appears on the LCD
panel.
Note:
Load the sheet vertically, like most magazines.
E
Press the button.
The paper moves to the start position.
F
If ARE THESE SETTINGS OK? appears on the
LCD panel, press the
NO and then press the
media type and paper remaining, and then
press the button to set the media.
The previous setting appears on the LCD panel.
If the media type and paper remaining are
correct, select YES and then press the
button.
User's Guide
Paper Handling
or button to select
button. Set the
37
G
If you use the paper basket, set it backward
position.
See "Using the paper basket and paper
guides" on page 40
Loading cut sheet A3 size or
larger / thick paper
When you load a cut sheet media A3 or larger or thick
paper (0.5 to 1.5 mm), follow the steps below.
Setting direction of the paper is as indicated below.
Paper
A3 or larger cut sheet (with
thickness of 0.5 mm or less)
Thick paper with length of 728
mm or less
Thick paper with length of 728
mm or longer
A
Turn on the printer by pressing the
B
Press the button repeatedly until Sheet
appears.
C
Make sure that the roll paper cover is closed.
D
Press the button.
Direction
Vertical
Vertical
Horizontal
button.