Positioning Operation (B-15532) - Mitsubishi Electric MELSERVO-J5 Series Sample Screen Manual

Positioning Operation (B-15532)

1
2
Outline
This screen is used to execute the positioning operation in the test operation mode.
Description
1. Starts the positioning operation mode in the test operation mode. Touch the switch again to cancel the
test operation mode.
Sets [M otor speed ], [Accel./decel. time constant] and [Travel distance].
2.
Displays the status of the servo motor.
3.
4. Sets the limit switch automatic on.
Operates the positioning operation.
5.
Operation
Fwd. rotation
Rev. rotation
Temporary stop
Restart remaining distance
Clear remaining distance
Remarks
・ Switches which display another screen do not operate during the test operation mode.
・ Cycle the power supply of the servo amplifier after performing the test operation.
Starts the positioning operation in forward rotation.
Starts the positioning operation in reverse rotation.
Stops the positioning operation which is being executed temporarily.
Restarts the positioning operation which is stopped temporarily.
Clears the positioning operation which is stopped temporarily.
35/128
Action
BCN-P5999-1471-3c
3
4
5