Mitsubishi Electric MELSERVO-J5 Series Sample Screen Manual page 6

■Project Data
Date
2020/11 MITSUBISHI_MR-J5-G_V_Ver1_E.GTX
2020/12 MITSUBISHI_MR-J5-G_V_Ver1a_E.GTX
2020/12 MITSUBISHI_MR-J5-G_V_Ver1b_E.GTX
2021/5 MITSUBISHI_MR-J5-G_V_Ver2_E.GTX
2022/4 MITSUBISHI_MR-J5-G_V_Ver3a_E.GTX
2022/7 MITSUBISHI_MR-J5-G_V_Ver3b_E.GTX
Project Data GT Designer3* Description
1.245F First edition
1.245F Corrected device settings such as the
status display at the time of alarm
occurrence screen and the operation
monitor screen.
1.245F
No revision
・Added the Positioning Operation
1.245F
screen.
・Corrected the output method of the
operation command in the JOG
operation screen.
・Limit switch automatic ON is
supported in the JOG operation
screen.
・Corrected the settings of the
current alarm in the Alarm display
screen.
Updated project information.
1.270G
The following improvements are applied
to the One-touch Tuning (2) screen.
・Display control of the status during one-
touch tuning
・Retain the adjustment result after the
completion of one-touch tuning
1.275M The following improvements are applied.
・Updated project information.
・Added the script to execute the initial
setting in the Main Menu (2) screen.
・Improved the display of motor total
travel distance and prediction motor
total travel distance in the Machine
Diagnosis (Total Travel Distance)
screen.
・Improved the display of the alarm No.,
added the alarm comment, and
expanded the range of the alarm
comment No. to be displayed in the
Alarm Display screen.
・Changed the first page No. displayed in
each language in the Manual Display
screen.
・Modified the input range of the station
No. to match the maximum number of
connectable motion modules in the Axis
Selection screen.
6/128
BCN-P5999-1471-3c