Revisions - Mitsubishi Electric MELSERVO-J5 Series Sample Screen Manual

REVISIONS

■Sample Screen Manual
Date Control No.*
2020/11 BCN-P5999-1342
2020/12 BCN-P5999-1342-1a
2020/12 BCN-P5999-1342-1b
2021/5 BCN-P5999-1471
2022/4 BCN-P5999-1471-3a
2022/7 BCN-P5999-1471-3b
2022/12 BCN-P5999-1471-3c
* The control No. is noted at the lower right of each page.
First edition
Corrected the screen image of the status display at the time of alarm
occurrence screen and the operation monitor screen.
7. UTILIZE SAMPLE SCREENS
・[Coming soon] was deleted.
・Updated 2.2 Necessary Equipment.
・Changed the screen images in 6.1 Screen Specifications.
・Updated 6.1.10 JOG Operation.
・Updated 6.1.11 Positioning Operation.
Added the case of using a motion module in the simple motion mode.
The following connection routes have been supported.
・Connection via a MELSEC iQ-F series programmable controller
・Connection over Ethernet
The following improvements have been applied.
・Corrected writing errors.
・Supported GT SoftGOT2000 (Multi-channel).
・Added script settings as the work after utilization.
・Added the connection availability of servo amplifiers for each model
in the Connection Configuration.
・The descriptions are modified in "PRECAUTIONS" as follows.
-Deleted the precaution when using the drive recorder function in the
simple motion mode.
-Added the description on transitioning from the customer's project
data screen to a sample screen.
-Added the description about the problem that the communication
timeout occurs immediately after starting the GOT.
5/128
Description
BCN-P5999-1471-3c