Works After Utilization; Settings Of Label (Gt Designer3) - Mitsubishi Electric MELSERVO-J5 Series Sample Screen Manual

7.3 Works after Utilization

In the sample screens, function addition and change of the settings are required in accordance with your system
configuration after utilization. Refer to the items in the table below for works after utilization.
⇒ "7.3.1 Settings of label (GT Designer3)"
⇒ "7.3.2 Settings of GOT Environmental Setting"
⇒ "7.3.3 Script setting"

Settings of label (GT Designer3)

Change [Assign (Device)] of label (GT Designer3) in accordance with the device assignment of each setting set in
your project data.
In the menu bar, go to [Common] - [Label] - [Open] to select the target label.
■Label Group No.100 Com_Label
Label Name
u16_Com_CngBsDv
s16_Com_StmInfRd
s16_Com_StmInfWt
u16_Com_RcpCmCntlDv
u16_Com_RcpCmNtcDv
s16_Com_CngLngDv
s16_Com_CngSytmLanDv
u16_Com_StmAlmNumOfOccStr
*1: For the function not used in your project data, it is not required to change [Assign (Device)] of the label.
*2: When replacing with the devices of your project data, the setting of each object in your project data does not
need to be changed to label (GT Designer3).
Data Type
Unsigned BIN16
Signed BIN16 [0..2]
Signed BIN16 [0..38]
Unsigned BIN16 [0..2]
Unsigned BIN16 [0..2]
Signed BIN16
Signed BIN16
Unsigned BIN16
84/128
Assign (Device)
Default Value *1 *2
GD65200 Screen switching device
(base screen)
GD65231 System information
reading device
GD65241 System information
writing device
GD65290 Recipe common settings
external control
information
GD65293 Recipe common settings
external notice
information
GD65221 Language switching
device
GD65222 System language
switching device
GD65297 System alarm observation
occurrence number
storage
Application
BCN-P5999-1471-3c