One-Touch Tuning (2) (B-15521) - Mitsubishi Electric MELSERVO-J5 Series Sample Screen Manual

One-touch Tuning (2) (B-15521)

1
2
3
Outline
This screen is used to execute the one-touch tuning.
Description
1. Selects the response mode. [Basic mode] is selected at the initial display of the sample screen.
2. Displays the progress and the status of the one-touch tuning. The progress is displayed in [0%] to
[100%].
The status of the one-touch tuning is displayed as follows. When the one-touch tuning is not performed,
the status is not displayed.
Status
During tuning
Normal completion
Abnormal completion
3. Displays an error code.
4. Returns the values in one-touch tuning result to the values before one-touch tuning.
5. Returns the values in one-touch tuning result to the initial values.
6. Executes the one-touch tuning in the selected response mode.
7. Stops the one-touch tuning which is being executed.
8. Displays the adjustment result. The result is reset when the monitor target axis is selected in the Axis
Selection screen (B-16000).
9. Displays the One-touch tuning (1) screen.
Remarks
・ The [Return to value bef. adj.] switch and the [Return to initial value] switch are executed by pressing them
for 1 second.
・ Switches which display another screen do not operate during one-touch tuning.
During One-touch tuning, wait for a while.
One-touch tuning is completed.
An error occurred during the one-touch tuning.
Check the error code.
33/128
Comment
BCN-P5999-1471-3c
4
5
6
7
8
9