7. UTILIZE SAMPLE SCREENS
This section explains how to incorporate (hereafter utilize) the sample screens in your project data under the following
system configuration. When utilizing the screens in your project data, apply your system configuration to the system
configuration below.
Example: When utilizing the sample screens as the connected controller CH4 in your project data to which an RCPU
is set to the connected controller CH1.
GOT2000 (GT27**-V (640×480))
I/F: Standard I/F(Ethernet)
Network No. (Net No.) 2
PC No. (Station No.) 18
R base module
CH1
MELSEC PLC (RCPU)
I/F: Built-in Ethernet
Network No.:2 (virtual)
PC No. (Station No.):1 (virtual)
Motion module
(RD78G and RD78GH)
I/F: CC-Link IE TSN
Network No.:1
Station No.0
CH4
MR-J5-G
I/F: CC-Link IE TSN
Network No.1
Station No.1
Motor
75/128
BCN-P5999-1471-3c