Axis Selection (B-16000) - Mitsubishi Electric MELSERVO-J5 Series Sample Screen Manual

Axis Selection (B-16000)

1
Outline
This screen is used to select the monitor target axis.
Description
Selects the monitor target axis. Details of each item is as f ollows .
1.
Item
No.
Monitor Slct.
Net No.
St. No.
Axis No.
Axis Name
2. Displays the current page. The page is switched by changing the value.
3. Switches the page.
4. Displays the screen which was displayed previously. Cancels the settings performed in this screen.
5. Displays the screen which was displayed previously. Changes the monitor target based on the settings
performed in this screen.
Remarks
・ Comments registered to the comment group No.110 Axis name are displayed in Axis Name.
For details, refer to "8.2 Changing Axis Name".
Displays No. of the axis selection.
Touch the switch to change the monitor target.
Sets the network No. of CC-Link IE TSN which a servo amplifier is connected.
The setting range is 1 to 239.
Sets the station No. which is set to the servo amplifier. The setting range is 1 to
120.
Sets the axis of the servo amplifier. The setting range is 1 to 3.
1-axis servo amplifier/ A-axis=1, B-axis=2 and C-axis=3.
Displays the axis name.
Clears Net. No., St.No. and Axis No. to 0.
Press this button for 3 seconds to execute.
61/128
Details
BCN-P5999-1471-3c
4
2
3
4
5