Sample Project Data Setting - Mitsubishi Electric MELSERVO-J5 Series Sample Screen Manual

Sample project data setting

Change the settings of the sample project data by following the procedure below.
(1) Change the controller type and CH No.
⇒ "8.5.3.1 Changing the controller type and CH Nos. in a batch"
(2) Change the controller setting.
⇒ "8.5.3.2 Changing the controller setting"
8.5.3.1 Changing the controller type and CH Nos. in a batch
Since the setting of CH2 is changed to CH1, it is necessary to change the controller type and CH Nos. of CH1 in a
batch.
(1) Change the controller type of CH1 to [MELSEC iQ-F].
(2) Go to [Search/Replace] - [Batch Edit] - [CH No.].
104/128
BCN-P5999-1471-3c