Table of Contents
Advertisement
8. Terminal Tray/ Port Removal
The Terminal Tray/ Port (1) can be found at the rear of the 704 Series 2.
To remove the Terminal Tray/ Port you need to carefully unscrew 6 x screws (1-6)
With the Terminal Tray/ Port detached you can gain
access to the Speaker Terminal Connectors.
The Cables are connected to the Speaker Terminals with
Crimped Spades which can easily be pulled off the Speak-
er Terminal Connectors. This enables you to completely
remove the Speaker Tray/ Port and put it to one side.
The contents of this document and associated files contain confidential information that is propriety to B&W
Group Ltd., and are intended solely for the purpose of servicing the product. The information is intended for use
by service technicians familiar with electronic products. No part of the contents should be supplied or published
elsewhere.
Page 22
6
5
2
4
3
1
© B&W Group Ltd 2017
Advertisement
Table of Contents
