Plinth Removal - Bowers & Wilkins 704 S2 Series Service – Technical Manual

Hide thumbs Also See for 704 S2 Series:

Table of Contents

3. Plinth Removal

Prior to servicing the 704 Series 2, it is recommended that the Plinth is removed.

To safely remove the Plinth without damaging the 704 Series 2 we recommend following the

below steps:



Place the cloth bag over the top of the 704 Series 2 ensuring that the Tweeter and top

of the cabinet are covered. (The cloth bag is supplied with the original packaging)



Attach the Poly Top to the top of the 704 Series 2.



Carefully place the 704 Series 2 on its side. Ensure the poly remains in place.



Carefully lift the 704 Series 2 so that it is now upside-down on the poly.



You can now access the 4 screws at the base of the Plinth to safely remove the it

without damaging the cabinet.

Reverse the process to safely turn over the 704 Series 2 and return it to its upward

position.

The contents of this document and associated files contain confidential information that is propriety to B&W

Group Ltd., and are intended solely for the purpose of servicing the product. The information is intended for use

by service technicians familiar with electronic products. No part of the contents should be supplied or published

elsewhere.

Page 11

Table of Contents