Tweeter Removal - Bowers & Wilkins 704 S2 Series Service – Technical Manual

Hide thumbs Also See for 704 S2 Series:

Table of Contents

4. Tweeter Removal

Start by using Tool 1.5 - MM09989 HF Trim Removal Tool. Insert the Lip of the Trim Removal

Tool into the Tweeter Trim. Lever the Trim Removal Tool against the Grille until Tweeter Trim

begins to lift from the cabinet (1).

Note: Take care when putting pressure on the Grille so not to damage the Tweeter

The Outer-Rim can now be removed and placed to one side awaiting reassembly. Take note

of correct orientation of the Tweeter Trim (Small arrow and single plastic peg at the top). (2)

With the Tweeter Trim removed you are able

to unscrew the 4 x Screws holding the

Tweeter Assembly in place (3-6).

The contents of this document and associated files contain confidential information that is propriety to B&W

Group Ltd., and are intended solely for the purpose of servicing the product. The information is intended for use

by service technicians familiar with electronic products. No part of the contents should be supplied or published

elsewhere.

Page 12

Table of Contents