Wi-Fi Interface; Power Connection Planning - Pylontech Pelio-L-5.12 Operation Manual

Lithium-ion phosphate battery

Hide thumbs Also See for Pelio-L-5.12:

Table of Contents

Reminding

Pull out the USB flash disk in time after operation success

Must close and lock the cover after operation

4.12 Wi-Fi interface

The Wi-Fi module is not in the package of battery module. It`s within the KIT W, KIT G

and KIT WIFI which are purchased separately.

Only the master battery needs to connect the Wi-Fi module (control maximum 20

batteries).

The WiFi block need to connect to local 2.4G WiFi net and need an APP for operation.

For detailed information please refer to user manual of WiFi block.

Function:

7*24H monitor of your battery system

Put in

Lock

Working

For further guidance of Wi-Fi module operation, please read the separate Wi-Fi module

manual.

Each stack maximum 4 batteries and maximum 5 stacks. For multi batteries connection,

the suitable bus bar and DC breaker is required.

Please take follows into consideration:

The LED towards outside

The WiFi block will automatic turns on after battery

turns on. And then just need to operate on APP.

Rotate 90°until the end

Table of Contents