This manual introduces PowerCube-H1 from Pylontech. PowerCube-H1 is a high voltage Lithium-Ion Phosphate Battery storage system. Please read this manual before you install the battery and follow the instruction carefully during the installation process. Any confusion, please contact Pylontech immediately for advice and clarification.
5) In case of fire, only dry powder fire extinguisher can be used, liquid fire extinguishers are prohibited; 6) Please do not open, repair or disassemble the battery except staffs from Pylontech or authorized by Pylontech. We do not undertake any consequences or related responsibility which because of violation of safety operation or violating of design, production and equipment safety standards.
Page 4
eminded Please rea ad the user manual ca refully (in th he accessor ries); If the batt tery is stored d for long t ime , it is re equired to c charge them m every six months, an the SOC s hould be no o less than 8 80%;...
PowerCube-H1 is a high voltage battery storage system based on lithium iron phosphate battery, is one of new energy storage products developed and produced by Pylontech, it can be used to support reliable power for various types of equipments and systems. PowerCube-H1 is especially suitable for application scene of high power, limited installation space, restricted load-bearing and long cycle life.
Cautio on: PowerCu ube-H1 with hout soft-sta art circuit. So o must choo ose the inve erter, which has soft-sta functio on, otherwis se has the ri isk of equip ment break kdown. 2.2 Sp pecification 2.2.1 T The parame eter of syste POWERCU UBE-H1...
Communication RS485 / CAN Protection Class IP20 Weight Operation Life 10+Years Operation Cycle Life 4000 Operation Temperature 0~50℃ Storage Temperature -20~60℃ Product Certificate TÜV, CE Transfer Certificate UN38.3 Battery Module Front Interface Power Terminal +/- To connect battery series power cables. Status ●...
2.2.3 Control Module (internal power supply) Control Module has two types: internal and external power supply. Control Module (SC1000A-100S) Front Interface Power Terminal +/- To connect battery power cables in series. Power Switch Switch the battery system’s (control module and high voltage DC power) ON/OFF. External Power Terminal +/- Connect battery system with Inverter.
dress, and t he 6 bit di al switch su upport a 120 0Ω resistanc CAN / / RS485 AN Commun nication Term minal: (RJ45 5 port) follow w CAN prot tocol, for co ommunicati on betwee ttery system m and invert 485 Commu unication Te rminal: (RJ4...
Page 11
Indicates the battery is Alarm Light low. Flash Standby Normal Indicates Standby The highest capacity The highest capacity Normal Light indicator LED flashes indicator LED flashes Alarm Light (flash 2), others lighting (flash 2), others lighting Charge Stop charging, PRC Protection Light lighting...
2.2.4 Level C Control Mod dule (MBMS MBMS is the contr roller for mu ultiple battery y piles in pa arallel conn nection. If the p power supp ly is 220Vac c, an adapt or (220Vac to 12Vdc) w will be provid ded.
CAN / / RS485 RS485; CA AN Commun nication Term minal: (RJ45 5 port) follow w CAN prot tocol, for co ommunicati on betwee ttery system m and PCS. 485 Commu unication Te rminal: (RJ4 45 port) follo ow RS485 pr rotocol, for c communica ation...
Page 14
Flash Standby Normal Indicates Standby Normal Light The highest capacity indicator LED flashes (flash 2), others lighting Charge Alarm Light Stop charging, ALM Protection Light lighting Flash Indicate based on Normal capacity Discharge Stop discharging, ALM Protection Light Light lighting Note: The flashing instructions, flash 1 - light 0.25s / off 3.75 seconds;...
3. Installation 3.1 Tools The following tools are required to install the battery pack Wire Cutter Crimping Modular Plier Screw Driver Set NOTE Use properly insulated tools to prevent accidental electric shock or short circuits. If insulated tools are not available, cover the entire exposed metal surfaces of the available tools, except their tips, with electrical tape.
Unpacking and check the Packing List: Power Cable + (Battery Module Orange/0.16m/4AWG/2 Orange Parallel Connection) Surlok Terminal Power Cable - (PH Main Control Black/2.5m/4AWG/2 Black Surlok Module Battery) Terminal 2500 Power Cable (Battery Module Orange/0.18m/4AWG/1 Orange & Serial Connection) 1 Black Surlok Terminal Battery Cascade Black/0.18m/8 Core Super 5th Communication Cable (0.18m)
Page 17
Standard) Standard Grounding: The PowerCube-H1 modules’ grounding is based on metal directly touch between the module’s surface and rack’s surface. So it needn’t grounding cables at all. If uses normal rack, it can remove the paint at the corresponding place. Or install a grounding cable to the grounding point of the modules.
3.4 Installation Location Make sure that the installation location meets the following conditions: The area is completely water proof. The floor is flat and level. There are no flammable or explosive materials. The ambient temperature is within the range from 0°C to 50°C. ...
Page 20
Otherwise the system need long time to do the balance for this replaced battery module. NOTE After installation, do not forget to register online for full warranty: www.pylontech.com.cn/service/registration 20 / 23 17PIHV1101...
5. Trouble Shooting Normal example: 1) If the system is turned on, and the status LED of Control Module is red, but the status LED of Battery Module is green. Please check the External Battery Communication Cable (CAN / RS485) connection is right or not. 2) If the system is turned on, and the status LED of Control Module is fleshing in red, the battery system self check can’t detected.
Damaged batteries are dangerous and must be handled with the utmost care. They are not fit for use and may pose a danger to people or property. If the battery pack seems to be damaged, pack it in its original container, and then return it to Pylontech or an authorized dealer. NOTE Damaged batteries may leak electrolyte or produce flammable gas.
Page 23
Pylon Technologies Co., Ltd. No. 73, Lane 887, ZuChongzhi Road, Zhangjiang Hi-Tech Park Pudong, Shanghai 201203, China T+86-21-51317697 | +86-21-51317698 Eservice@pylontech.com.cn Wwww.pylontech.com.cn 23 / 23 17PIHV1101...