Advertisement
Quick Links
Advertisement
Related Manuals for Pylontech Pelio-L-5.12
Summary of Contents for Pylontech Pelio-L-5.12
- Page 1 Pelio-L-5.12 WI-FI Set-up Guidance...
- Page 2 Instructions Step 1: Install WI-FI Logger ......................3 Step 2: WI-FI Network Config ..................... 4 Step 3: Create Plant ........................8 Step 4: Add Collector ........................9 Appendix: Pylontech Home APP User's Guide ................ 11 2 / 15...
- Page 3 You must read this instruction manual carefully before installation to ensure you can install and use your battery correctly. This document describes how to configure Pelio-L-5.12 of the Wi-Fi logger and how to set up the Pylontech Home APP. Step 1: Install Wi-Fi logger 1.
- Page 4 1. LED off: Indicates the logger network connection is Indicate logger abnormal. network 2. LED on: Indicates the logger network connection is communication normal status 3. LED fast flash: Indicates the logger enters network configuration mode Indicate the status of 1.
- Page 5 If you already have an account, just enter the account and password to login * Organization code defaults to Pylontech. If the distributor provides you with other organization codes, please keep the corresponding codes and fill in the codes when registering an account. The organization code is used to bind the corresponding organization to obtain the after-sales service provided by them.
- Page 6 (the NET light of the logger is always on during the network config process) . (3) After logging in to the Pylontech Home App, enter the "Me" page and select "Config Network". At this time, the window will automatically pop up "Network Configuration Instructions" (new configuration instructions and screenshots are required), reading this instruction can guide you in network configuration.
- Page 7 (5) Enter the S/N of the logger ▪ Method 1: Select ‘Scan’ to get the QR code of the WIFI logger ▪ Method 2: Type in the SN on the logger manually Method 1： Scan the QR code on Wi-Fi logger Type in SN Method 2: Select...
- Page 8 If network config If network config fail, success, the page will the page will turn to turn to “Config Success” “Config timeout” Note: After selecting ‘Start Config’, if you confirm that the device has exit config network mode (see the first step to confirm the status of the flashing light on the logger), you can click "Close", and re-try the above step (2) then clicking "Start Config".
- Page 9 Step 3: Create Plant 1. Select“Plants”and enter plant page; 2. Select ‘more’，then select “Create Plant”； • Fill in the plant information is required information); • Plant Owner:About Plant Owner, please note the following settings: Plant Owner name is automatically generated when registering an account. If you want to change the name of Plant Owner，please do the following steps after “Create Plant”：...
- Page 10 Step 4: Add Collector • Please note: In order to facilitate your view and manage the information of different batteries in the same system, it is recommended to add their collectors under the same plant. System 1 System 2 System n Plant A Plant B Plant *...
- Page 11 2. Scan the QR code on the front of the Wi-Fi logger or manually enter the SN number of the logger, and Select "Add". 3. After adding, Select "Finish" in the upper right corner to save and exit. 4. The collector was added successfully. You can continue to select "Add"...
- Page 12 Appendix：Pylontech Home App user guide 1. Select "Plants" to view the detailed information about the plant you have added. Select the plant you want to view, and select the arrow on the right to display all battery information connected to the power station.
- Page 13 ： Note For battery information, please refer to the following table: Wi-Fi SN SN (serial number) of Wi-Fi logger Basic Product SN SN (serial number) of BMS Information BMS version Version of BMS software Current(A) Current of the battery during its working status Voltage (V) Voltage of the battery Remain Capacity (Ah)
- Page 14 2. You can give us feedback by submitting “Tickets” on: Product Advisory b. System Issue ②Select“+” to submit a ticket ④*are required information； In Description, you can enter a brief description of the problem; In Attachments you can add attachments (such as photos) as a supplement.
- Page 15 4. Select "Events" to view the alarms or faults that the system detects when the battery is abnormal. Please contact the after-sales service to solve it. 5. Select ‘me’ and you can log out of the current account or reconfigure a new device. 5.