Power On - Pylontech Pelio-L-5.12 Operation Manual

4.9 Power on

Double check all the power cable and communication cable between batteries and
between battery and inverter. Switch ON the circuit breaker between battery and
inverter if available.
1) Operation
Switch ON
Press Start
Or
Active by DCBUS
voltage
LED on
Reminding
Must close and lock the cover after operation
2) Information for reference
Soft start
Time
If no fault exist, battery will start pre-charging
process. Maximum 3 seconds and then close main
MOSFET.
If 20 batteries in parallel connection, it takes maximum
Switch on the power switch of
all the batteries
Press Start button of first
battery for
seconds.
Or
Provide a DC voltage (>48Vdc)
on power terminal.
The LED of the first battery will
lighting and then ALL the batteries
LED will lighting.
more than 3