Plastic Covers - Pylontech Pelio-L-5.12 Operation Manual

Lithium-ion phosphate battery

Hide thumbs Also See for Pelio-L-5.12:

Table of Contents

4.8 Plastic covers

After all the installation and debug finished on site, the plastic covers can be installed.

1) Knock out if there is cable going through.

2) Simply click in the cover on both sides.

3) Screw and fixed the cover with a cross screwdriver. (PH2 header)

4) For the top battery, knock out top cover if there is cable going through.

5) Screw and fixed the cover with a cross screwdriver and the plastic screw.

Knock-out holes

Table of Contents