Equipment Interface Instruction - Pylontech US3000C Operation Manual

2.3 Equipment interface instruction

Power Switch
ON: ready to turn on.
OFF: power off. For storage or shipping.
Start
Turn on: press more than 0.5s to start the battery module
Turn off: press more than 0.5s to turn off the battery.
RUN
Green LED lighting to show the battery running status
Alarm
Red LED flashing to show the battery has alarm; lighting to show the battery is
under protection.
SOC
6 green LEDs to show the battery's current capacity.
ADD Switch
Dip1: RS485 baud rate 1: 9600; 0: 115200
Dip2~4, reversed.
Console
For manufacturer or professional engineer to debug or service.
6