Equipment Interface Instruction; Phantom-S Product Front Interface; Led Indicators - Pylontech Phantom-S Product Manual

2.3 Equipment Interface Instruction

This section details the front and back panel of the interface functions.
PHANTOM Product Front Interface
Start Button
After turn on the Power Switch (back face), touch it 3sec to start up the battery, or touch 3sec to turn the
battery into sleep mode (Soft-start/shut down).
LED Status Indicators (Run, Alarm, SOC)
LED Indicator
Condition
Power off
Power on
Idle/Normal
Charge
Discharge
Alarm ALR:●; Other LEDs are same as above.
System
ON
●/●
flash, on: 0.3s; off: 3.7s
●
flash, on:0.5s; off: 1.5s
●/●
19PISV0606
RUN Alarm
-
● ●
●
●
●
-
●
1
- -
●
- -
Show soc; highest LED flash
-
-
5/23
2 3
- -
● ●
- -
on: 0.5s; off 0.5s
Show soc
- -
4
-
●
-
-