System Working Environments Checking; Cleaning; Ventilation; Grounding System - Pylontech Pelio-L-5.12 Operation Manual

4.2 System Working Environments Checking

4.2.1

Cleaning

Reminding
Keep environment clean
Before installation please make sure the dust and iron scurf must be removed to keep
a clean environment. The system cannot be installed in desert area without an
enclosure to prevent from sand.
4.2.2

Ventilation

Reminding
Keep environment suitable
There are no mandatory ventilation requirements for battery module, but please avoid
of installation in confined area. The aeration shall avoid of high salinity, humidity or
temperature.
Reminding
Please avoid frost or direct sunlight.
Out of the working temperature range will cause the battery system high / low
temperature alarm or protection which further lead to the cycle life reduction.
According to the environment, an air-conditioning system could be installed when
necessary.
4.2.3

Grounding System

Caution
Make sure the grounding point of the basement is stable and reliable.
The resistance of the grounding system must <=100mΩ
4.2.4

Clearance

Keep away from any heat source for more than 2 meters.
Minimum clearance to battery module(rack) shall more than 0.4 meters.