Advertisement
9. Press STOP again or end up training in 15s, TIME will display total workout time; DISTANCE will
display total workout distance; CALORIES will display total consumption during workout; WATT,
SPEED and RPM will switch to display AVG. & MAX. in every 5s.
10. With pulse signal input, PULSE window will display user actual pulse and 65%, 85% MAX (Figure
21~23). Pulse window displays nothing if no pulse signal input (Figure 19~20).
11. Press any PROGRAM key then perform the program accordingly.
OPTION SETTING
SETTING mode
1. Hold on STOP & ENTER key for 2s, buzzer will sound 1 long beep. DISTANCE keep lighting up,
M/KM flash once per second (Figure 50~51).
2. Press UP or DOWN to select KM or ML, press ENTER to confirm then skip to Standby mode.
3. No action to console for 30s, it will go to Standby mode.
RESET Mode
1. In any mode, press STOP for 2s, system will
do TOTAL RESET.
2. LCD flash in every 2 seconds, buzzer sound
for 2 seconds.
3. Reverse to Standby page, all setting
resume to preset value.
SLEEPING mode
In Standby mode, if no key press/RPM/pulse
input for 30s, console will go to SLEEPING
mode.
COMPUTER OPERATION |
21
Advertisement
