Advertisement
BUTTON FUNCTIONS
Enter:
Press this button to enter setting mode. The button will cycle through:
Normal→Time→DIST→CAL→T.H.R
Press this button to confirm the setting values.
Hold down 3 seconds to reset all values to zero.
Up:
Increase the setting value of the following functions.
Time→DIST→CAL→T.H.R
Down:
Decrease the setting value of the following functions.
Time→DIST→CAL→T.H.R
FUNCTIONS AND OPERATIONS
AUTO ON/OFF
The monitor will wake automatically if it detects movement. If no movement is detected for 4 minutes, the
monitor will turn off and all function values will reset to zero.
TIME:
Press the ENTER until the TIME function is reached. Use the UP or DOWN buttons to choose your desired
values.
Count up:
Without setting the time value, the monitor will count time from 00:00~99:59.
Count down:
6. COMPUTER OPERATION
13
SP-880
Advertisement
