Advertisement
4. Press START button once enter into PAUSE mode, Buzzer will sound for 0.5s per second within
30s. All values are displaying on LCD and flashing in every 2s. If continue to stop training for 5
minutes, buzzer sounds 2s and enter to Wake-up mode. Press START to resume workout.
5. No signal input for 30s, buzzer sounds 1s and enter to Wake-up mode.
6. Press STOP key or end up training, TIME will display total workout time; DISTANCE will display
total workout distance; CALORIES will display total consumption during workout; WATT, SPEED
and RPM will switch to display AVG. & MAX. in every 5s.
7. With pulse signal input, PULSE window will display user actual pulse and 65%, 85% MAX (Figure
21~23). Pulse window displays nothing if no pulse signal input (Figure 19~20).
8. Press any PROGRAM key then perform the program accordingly.
3.8 Target HR mode:
1. In Standby mode, press Target Heart-Rate key and
for 1s.
2. AGE value is flashing, press UP and DOWN to pre-set your Age (Figure 45). Press ENTER to confirm
along with buzzer beeps 1s and
3. When start workout, MAX HR lights up, 65% & 85% Heart rate will switch to display. TIME/
DISTANCE/ CALORIES/ WATTS/ SPEED/ RPM will calculate workout value (Figure 46).
4. When Heart Rate goes below to 65%,
until user HR achieve above 65% (Figure 47).
5. When Heart Rate exceeds to 85%,
user HR goes below 85% (Figure 48).
6. When Heart Rate goes between 65% ~ 85%, only
7. No signal input for 30s, buzzer sounds 1 short beep and enter to Wake-up mode.
8. Press START button once enter into PAUSE mode, Buzzer will sound for 0.5s per second within 30s.
All values are displaying on LCD and flashing in every 2s. If continue to stop training for 5 minutes,
buzzer sounds 2s and enter to Wake-up mode. Press START to resume workout.
20
| COMPUTER OPERATION
and HEART RATE last lighting up.
&
& value will flash. And buzzer sounds in every 10s
&
& value will flash. And buzzer sounds in every 10s until
will flash (Figure 49).
will light up, along with along sound
Advertisement
