Computer Operation - LifeSpan SM-410 User Manual

VI. COMPUTER OPERATION
BUTTONS
MODE To confirm all settings.
To set up the value of TIME, DISTANCE, CALORIES and PULSE. You can hold the button to
SET
increase the value fast. (The computer has to be in stop condition).
To clear the set-up value. Press RESET key and hold for 2 seconds to reset all function
RESET
figures.
RECOVERY To test heart rate recovery status.
FUNCTIONS
SCAN Displays all function TIME,DISTANCE, CALORIES, PULSE, RPM/SPEED in sequence.
Displays the pedaling Rotation Per Minute. The RPM and SPEED will switch to another
RPM
display in every 6 seconds after exercise starts.
SPEED Displays the user's exercise speed.
1. You can press "SET" button to set target time between 0:00 to 99:00 for count down
TIME
2. It can be set up by the user or accumulated automatically for count up function.
1. You can press "SET" button to set target distance between 0:00 to 99:50 for count
DISTANCE
down function.
2. It can be set up by the user or accumulated automatically for count up function.
Displays the user's pulse. User may set the target pulse.
PULSE
When pulse value reaches to the target, the computer will alarm with "Bi" sound.
OPERATION PROCEDURE
1. Installs 2 pieces of 1.5V #4 batteries, then the screen will display as following "Drawing A" and
have "Bi" sound at the same time.
After that, it goes to the next step to the main menu as "Drawing B".
14

| COMPUTER OPERATION