Computer Operation - LifeSpan Delta 2.0 User Manual

VI. COMPUTER OPERATION
SPECIFICATIONS
• TIME
• SPEED (SPD)
• DISTANCE
• CALORIES
• ODOMETER(ODO)
• PULSE (PUL)
KEY FUNCTION
ITEM
MODE
SET
CLEAR(RESET)
ON/OFF(START/STOP)
OPERATION PROCEDURES
ITEM
AUTO ON/OFF
RESET
MODE
00:00-99:59
0.0-99.9KM/H (ML/H)
0.00-9999KM (ML)
0.0-9999KCAL
0.0-9999KM (ML)
0 40~240BPM
DESCRIPTION
• This key allows you to select and lock onto a particular function.
• Can be used to proceed with the data establishment for "TIME," "DISTANCE,"
"CALORIES," and "PULSE."
• The key to reset the value to zero by pressing it.
• The key to pause the signal input by pressing it.
DESCRIPTION
• The system turns on when any key is pressed or when it senses an input
from the speed sensor.
• The system turns off automatically when there is no signal input from the
speed sensor or no keys are pressed for approximately 4 minutes.
• The unit can be reset by either changing the battery or pressing the MODE
key for 3 seconds.
• To choose SCAN or LOCK, if you do not want the scan mode, press the MODE
key when the pointer is on the function you want, which begins blinking.

COMPUTER OPERATION |

13