Advertisement
3.5 Target TIME mode
1. In Standby mode, press Target Time key and TIME
2. TIME
value is flashing, press UP and DOWN to adjust value (Figure 39) and press ENTER to
confirm meanwhile buzzer beeps 1s and TIME lasting lighting up.
3. Pre-set TIME value counts down, DISTANCE, CALORIES, WATTS, SPEEED, RPM start to count up.
(Figure 40)
4. Press START button once enter into PAUSE mode, Buzzer will sound for 0.5s per second within 30s.
All values are displaying on LCD and flashing in every 2s. If continue to stop training for 5 minutes,
buzzer sounds 2s and enter to Wake-up mode. Press START to resume workout.
5. No signal inputs for 30s, buzzer sounds 1 short beep and enter to Wake-up mode.
6. Press STOP or end up training, TIME will display total workout time; DISTANCE will display total
workout distance; CALORIES will display total consumption during workout; WATT, SPEED and
RPM will switch to display AVG. & MAX. in every 5s.
7. With pulse signal input, PULSE window will display user actual pulse and 65%, 85% MAX (Figure
21~23). Pulse window displays nothing if no pulse signal input (Figure 19~20).
8. Press any PROGRAM key then perform the program accordingly.
18
| COMPUTER OPERATION
will light up, along with a long sound for 1s.
Advertisement
