Advertisement
OVERVIEW:
The unit is an electronic that display all workout parameters on LCD display. The workout
parameters include: Scan, Time, Speed, Distance and Calories. All workout parameters may be
selected by the select key.
Mode or Function
Power on
Select function Scan
Time
Speed
Distance
Calories
Reset
Auto off
SPECIFICATIONS:
FUNCTION
Controller
Sensor
Battery type
Operating temperature
Storage temperature
6. COMPUTER OPERATION
Action
If push the button, the unit will be on and display the parameters of the last
exercise.
Push the button, the unit will display 5 parameters one by one. Push the
mode key until the "SCAN" signal shows on right downside. The unit will
scan by through Time, Speed, Distance, and Calories each for 4 seconds.
Push the mode key until the "TMR" points to "Time" to display the exercises
time. If the bike stop moving, the unit will stop count time also.
When the "SPD" points to "SPD" to display the speed value.
unit: km/h.
When the "DIST" points to "Dist." to display the distance value.
unit: km.
When the "CAL" points to "CAL" to display the calories value.
unit: K Cal.
Push the mode key over 3 seconds the showing will become to zero.
The unit will be off if the speed signal stops over 4 minutes.
Auto Scan
Elapsed Time
Speed
Distance
Calorie
Every 4 seconds
0.00~999.9kcal
4-bit single chip microprocessor
No-contact magnetic type
2 pcs of Size-AA or UM-3
11
00:00~99:59
0.0~99.9km/h
0.00~99.99km
0°~+40℃
-10°~＋60℃
Advertisement
