Computer Operation - LifeSpan SM-800 User Manual

VII. COMPUTER OPERATION
BUTTONS
MODE
SET
RESET
RECOVERY
FUNCTIONS
SCAN
RPM
SPEED
TIME
DISTANCE
CALORIES
PULSE
OPERATION PROCEDURE
1. Installs 2 pieces of 1.5V #4 batteries, then the screen will display as following "Drawing A" and have
"Bi" sound at the same time.
After that, it goes to the next step to the main menu as "Drawing B".
16

| COMPUTER OPERATION

To confirm all settings.
To set up the value of TIME, DISTANCE, CALORIES and PULSE. You can
hold the button to increase the value fast. (The computer must be in stop
condition.)
To clear the set-up value. Press RESET key and hold for 2 seconds to reset all
function figures.
To test heart rate recovery status.
Displays all function TIME→DISTANCE→CALORIES→PULSE→RPM/SPEED in
sequence.
Displays the pedalling Rotation Per Minute. The RPM and SPEED will switch to
another display in every 6 seconds after exercise starts.
Displays the user's exercise speed.
1. You can press "SET" button to set target time between 0:00 to 99:00 for
count down function.
2. It can be set up by the user or accumulated automatically for count up
function.
1. You can press "SET" button to set target distance between 0:00 to 99:50 for
count down function.
2. It can be set up by the user or accumulated automatically for count up
function.
1. You can press "SET" button to set target calories between 0 to 99:90 for
count down.
2. It can be set up by the user or accumulated automatically for count up
function.
Displays the user's pulse. User may set the target pulse. When pulse
value reaches to the target, the computer will alarm with "Bi" sound.