Table of Contents
Advertisement
CAUTION
Risk of injury from heavy lifting
If not handled correctly, carrying and installing
appliances can cause injury to the limbs or torso.
If necessary, carry and install the appliance with
u
another person.
Use appropriate aids to prevent damage or injury.
u
CAUTION
Damage from improper use
The appliance surfaces must not be used as work or
storage surfaces. This can damage the appliances
(particularly in the case of hard and sharp objects).
Never use the appliances as work or storage
u
surfaces.
Keep hard or sharp objects away from the
u
appliance surfaces.
PLEASE NOTE
Faults and errors
In the event of faults or incorrect use, error
messages will be displayed.
In the case of faults and errors, follow the
u
instructions in the "Troubleshooting" chapter.
In the event of any faults or errors that are not
u
mentioned, switch the appliance off and contact
BORA Service.
PLEASE NOTE
Appliance damage caused by pets
Pets may damage the appliance or injure
themselves.
Keep pets away from the appliance.
u
www.bora.com
2.3
Safety information for
installation
ö
DANGER
Risk of injury from incorrect assembly
Failure to observe the installation instructions can
lead to injury.
The appliance must only be installed and
u
assembled by trained specialists who are familiar
with and comply with the standard national
regulations and supplementary regulations of the
local utility companies.
Work on electrical components must only be
u
conducted by trained electrical personnel.
Conduct all work extremely attentively and
u
conscientiously.
Before handing the appliance or system over to
u
the end user, ensure that it has been correctly
installed.
ö
DANGER
Risk of electric shock from damaged appliance
A damaged appliance can cause an electric shock.
Check the appliance for visible damage prior to
u
installation.
Do not install or connect any damaged
u
appliances.
Do not operate any damaged appliances.
u
ö
DANGER
Risk of electric shock from incorrect stripping
of cables
Incorrect stripping of the connection cable to
external switching devices results in a risk of
electric shock.
Ensure that the stated stripping lengths are
u
adhered to.
CAUTION
Risk of burning from control knobs that are not
positioned optimally
If the control knobs are not installed in a suitable
place, during operation there is a risk of sustaining
burns from the cooktop surface.
Only install the control knobs in a suitable place,
u
which is practical and safe.
Safety
EN
5
Advertisement
Table of Contents
