Table of Contents
Advertisement
Installation
EN
5
Fig. 4.73 Connecting the cooking zones when the cooktop is installed
rotated by 180° and the ports are on the front of the
appliance
[1]
Cooktop
[2]
Rear cooking zone (zone 1)
Front cooking zone (zone 2)
[3]
[4]
Rear cooking zone control knob (zone 1)
[5]
Front cooking zone control knob (zone 2)
Connecting the control knob on the Tepan stainless steel
grill
In the standard set-up the ports are on the back of the Tepan
stainless steel grill PKT3.
In the case of the built-in version of the PKT3 installed rotated by
180°, excess cable must be reeled up in meander form and secured
with cable ties.
1
Fig. 4.74 Control knob port at the rear of the cooktop
38
1
2
3
4
2
3
Front cooking zone control knob port (zone 1)
[1]
[2]
Extractor electronics interface port
[3]
Rear cooking zone control knob port (zone 2)
5
Fig. 4.75 Standard connection of appliances that connect at the rear
(PKT3)
[1]
Cooktop
[2]
Rear cooking zone (zone 2)
[3]
Front cooking zone (zone 1)
[4]
Rear cooking zone control knob (zone 2)
[5]
Front cooking zone control knob (zone 1)
5
Fig. 4.76 Connecting the cooking zones when the cooktop is installed
rotated by 180° and the ports are on the rear of the
appliance (PKT3)
1
2
3
4
1
2
3
4
www.bora.com
Advertisement
Table of Contents
