Using the BayStack 450 10/100/1000 Series Switch
When configuring VLANs, you configure the switch ports as tagged or untagged
members of specific VLANs (see Figures 1-24 to 1-29).
In Figure 1-24, untagged incoming packets are assigned directly to VLAN 2
(PVID = 2). Port 5 is configured as a tagged member of VLAN 2, and port 7 is
configured as an untagged member of VLAN 2.
PVID = 2
Untagged packet
CRC
Data
SA
DA
Before
Figure 1-24.
Port-Based VLAN Assignment
1-54
Port 1
Port 2
Port 3
802.1Q Switch
Port 6
Port 7
Port 8
Untagged member
of VLAN 2
Tagged member
of VLAN 2
BS45011A
309978-D Rev 01