Table 3-41. Telnet/Snmp Manager List Configuration Screen Fields - Nortel BayStack 450-24T Using Manual

Table 3-41. TELNET/SNMP Manager List Configuration Screen Fields
Field Description
TELNET Access Allows remote access to the CI through a TELNET session.
Default
Range
Login Timeout Specifies the amount of time you have to enter the correct password at the
console-terminal prompt.
Default
Range
Login Retries Specifies the number of times you can enter an incorrect password at the
console-terminal prompt before the session is terminated.
Default
Range
Inactivity Specifies the amount of time the session can be inactive before it is terminated.
Timeout
Default
Range
Event Logging Specifies the types of events that will be displayed in the Event Log screen (see "Display
Event Log" on page 3-128).
Default
Range
All: Logs the following TELNET events to the Event Log screen:
•
•
•
None: Indicates that no TELNET events will be logged in the Event Log screen.
Accesses: Logs only TELNET connect and disconnect events in the Event Log screen.
Failures: Logs only failed TELNET connection attempts in the Event Log screen.
309978-D Rev 01
Enabled
Enabled, Disabled
1 minute
0 to 10 minutes (0 indicates "no timeout")
3
1 to 100
15 minutes
0 to 60 minutes (0 indicates "no timeout")
All
All, None, Accesses, Failures
TELNET connect: Indicates the IP address and access mode of a TELNET session.
TELNET disconnect: Indicates the IP address of the remote host and the access
mode, due to either a logout or inactivity.
Failed TELNET connection attempts: Indicates the IP address of the remote host
whose IP address is not on the list of allowed addresses, or indicates the IP address
of the remote host that did not supply the correct password.
Using the Console Interface
(continued)
3-119