Figure E-5. Mac Address-Based Security (1 - Nortel BayStack 450-24T Using Manual

Using the BayStack 450 10/100/1000 Series Switch
1
Review "MAC Address-Based
Security" in Chapter 1.
Go to the MAC Address
Security Configuration screen.
MAC Address Security
Configuration screen
Set MAC Address Security
field to Enabled.
Partition port
on intrusion?
Yes
1. Set the Partition Port
on Intrusion field to
Enabled.
2. Set the Partition Time
field to the appropriate
value.
Isolate the
intruding node?
Yes
A
Figure E-5. MAC Address-Based Security (1 of 2)
E-6
B
No
No
B
A
Set the DA Filtering on
Intrusion field to Enabled.
Issue
No
SNMP trap on
intrusion?
Yes
Set the Generate SNMP
Trap on Intrusion field
to Enabled.
Go to the SNMP
Configuration screen.
SNMP Configuration
screen
Set the Trap Address and
the associated Community
String field values (refer to
"SNMP Configuration in
Chapter 3).
Return to the MAC Address
Security Configuration
screen.
2
2
Key
Off-page reference
On-page reference
BS450104A
309978-D Rev 01