Figure E-7. Eapol-Based Security - Nortel BayStack 450-24T Using Manual

Using the BayStack 450 10/100/1000 Series Switch
3
Review "EAPOL-Based
Security" in Chapter 1.
Go to the Console/Comm Port
Configuration screen.
Console/Comm Port
Configuration screen
Configure the following
screen fields (as described in
"Console/Comm Port
Configuration" in Chapter 3):
o Primary RADIUS Server
o Secondary RADIUS Server
o RADIUS UDP Port
o RADIUS Shared Secret
Go to the EAPOL Security
Configuration screen.
A
Figure E-7. EAPOL-Based Security
E-8
A
EAPOL Security
Configuration screen
Set the EAPOL Administrative
State field value to Enabled.
Set the Administrative Status
field value to Auto, for each
secured port.
Set other field values
as required.
Done
Key
Off-page reference
On-page reference
BS450106A
309978-D Rev 01