Using the BayStack 450 10/100/1000 Series Switch
The switch can also detect trunk member ports that are physically misconfigured.
For example, in Figure 1-57, trunk member ports 2, 4, and 6 of switch S1 are
configured correctly to trunk member ports 7, 9, and 11 of switch S2. The
Spanning Tree Port Configuration screen for each switch shows the port state field
for each port in the Forwarding state.
S1 Port Configuration screen
Figure 1-57.
1-94
S1
T1
S2
Example 1: Correctly Configured Trunk
S2 Port Configuration screen
BS45030A
309978-D Rev 01