Appendix G Default Settings; Table G-1. Factory Default Settings For The Baystack 450 Switch - Nortel BayStack 450-24T Using Manual

Table G-1 lists the factory default settings for the BayStack 450 switch.
Table G-1. Factory Default Settings for the BayStack 450 Switch
CI screen
IP Configuration/Setup (page 3-9)
SNMP Configuration (page 3-14)
309978-D Rev 01
Field
BootP Request Mode
In-Band Stack IP Address
In-Band Switch IP Address
In-Band Subnet Mask
Default Gateway
IP Address to Ping
Start Ping
Read-Only Community String
Read-Write Community String
Trap IP Address
Community String
Authentication Trap
Link Up/Down Trap
Appendix G
Default Settings
Default setting
BootP Disabled
0.0.0.0
(no IP address assigned)
0.0.0.0
(no IP address assigned)
0.0.0.0
(no subnet mask assigned)
0.0.0.0
(no IP address assigned)
0.0.0.0
(no IP address assigned)
No
public
private
0.0.0.0
(no IP address assigned)
Zero-length string
Enabled
Enabled
(continued)
G-1